网站首页

/

产品展示
产品展示
电子式湿度控制器 DCF 010(直流)

产品名称:

电子式湿度控制器 DCF 010(直流)

产品简介:

详细信息

TECHNICAL DETAILS

Switch temperature difference(humidity) 4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH
Reaction time approx. 5 sec.
External sensor cable 2 m with snap in connector (included in the delivery)
Contact type contact maker NO (MOSFET) or contact breaker NC (MOSFET)
Service life 250VAC, 10 (2) A / 120VAC, 15 (2) A DC 30W at 24VDC to 72VDC
Operating voltage > 100,000 cycles
Optical indicator DC 20 to 56 V
Connection LED
Mounting 6-pole terminal: stranded wire11.5 mm² (AWG 16); max. 2.5 mm² (AWG 12)
Casing plastic according to UL94 V-0, grey (bicolor)
Dimensions 93 x 53 x 44 mm
Weight approx. 120 g (incl. sensor)
Fitting position vertical
Storage temperature -40 to +80 °C (-40 to +176 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type IP20
Approvals UL File No. E164102, VDE, EAC
Note other versions on request

1When connecting with stranded wires, wire end ferrules must be used.

Setting range Art. No. Contact breaker (NC) Art. No. Contact maker (NO) Art. No. Contact maker (NO) Art. No. Contact maker (NO) Art. No. Contact maker (NO)
01012.0-20 DC 15 A -30 °C to +60 °C (-22 °F to +140 °F) 40 to 90 % RH +5 °C (+41 °F) pre-set Contact maker (NO)
01012.0-21 DC 13 A -30 °C to +60 °C (-22 °F to +140 °F) 40 to 90 % RH +5 °C (+41 °F) pre-set Contact maker (NO)
01012.0-22 DC 11 A -30 °C to +60 °C (-22 °F to +140 °F) 40 to 90 % RH +5 °C (+41 °F) pre-set Contact maker (NO)

² Versions with secondary switching function can also register the temperature and therefore offer an additional protection for electronics. Switch difference: 3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH.


版权所有:大连保税区宇洋贸易有限公司

技术支持:铭科网络